Microsoft 70-743 問題練習

Question No : 1
HOTSPOT
You have a server named VM1. VM1 is a virtual machine on a Hyper-V host that runs Windows
Server 2016.
You need to create a checkpoint that includes the virtual machine memory state of VM1.
What commands should you run? To answer, select the appropriate options in the answer area.

答えを確認する

正解:

Question No : 2
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.
You create a domain user named User1.
You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.
What should you do on each server? To answer, select the appropriate options in the answer area.

答えを確認する

正解:


Explanation:
References: https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx

Question No : 3
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.
Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)



The DHCP scopes are configured as shown in the Scopes exhibit. (Click the Exhibit button.)



For each of the following statements, select Yes if the statement is true. Otherwise, select No.

答えを確認する

正解:

Question No : 4
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a
server named Server1 that runs Windows Server 2016.
You install IP Address Management (IPAM) on Server1. You select the automatic provisioning method, and then you specify a prefix of IPAM1.
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.

答えを確認する

正解:


Explanation:
Invoke-IpamGpoProvisioning CDomain contoso.com CGpoPrefixName IPAM CIpamServerFqdn dc1.contoso.com

Question No : 5
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has two virtual machines named VM1 and VM2.
You discover that VM1 and VM2 can communicate with Server1 over the network.
You need to ensure that VM1 and VM2 can communicate with each other only. The solution must prevent VM1 and VM2 from communicating with Server1.
Which cmdlet should you use?

• A.Enable-VMSwitchExtention
• B.Set-NetNeighbor
• C.Set-VMSwitch
• D.Remove-VMSwitchTeamMember

答えを確認する

正解:
Explanation:
The virtual switch needs to be configured as an “Private” switch.
What you need is a private switch to insure VM1 and VM2 can talk to each other, but not the host. The difference between this and an Internal switch is that VM1 and VM2 can talk to the host and each other. Regardless the command is the same:
Set-VMSwitch (switchname)-SwitchType Private https://technet.microsoft.com/en-us/itpro/powershell/windows/hyper-v/set-vmswitch

Question No : 6
DRAG DROP
You have a physical server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host. On Server1, you create a virtual machine named VM1 that runs Windows Server 2016.
You plan to install the Hyper-V server role on VM1.
You need to ensure that you can configure VM1 to host virtual machines.
How should you compete the Windows PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

答えを確認する

正解:

Question No : 7
You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1. VM1 has resource metering enabled.
You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.
Which cmdlet should you run?

• A.New-VMResourcePool
• B.Set-VMNetworkAdapter
• C.Add-VMNetworkAdapterAcl
• D.Set-VMNetworkAdapterRoutingDomainMapping

答えを確認する

正解:
Explanation:
References: https://technet.microsoft.com/itpro/powershell/windows/hyper-v/add-vmnetworkadapteracl

Question No : 8
HOTSPOT
You have a server named Server1 that runs Windows Server 2016 server.
Server1 has the Docker daemon configured and has a container named Container1.
You need to mount the folder C:\Folder1 on Server1 to C:\ContainerFolder in Container1.
Which command should you run? To answer, select the appropriate options in the answer area.

答えを確認する

正解:

Question No : 9
You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

• A.Run theSet-Service cmdlet.
• B.Modify the Security settings of Dockerd.exe.
• C.Edit the Daemon.json file.
• D.Modify the Security settings of Docker.exe.

答えを確認する

正解:
Explanation:
References:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon
The preferred method for configuring the Docker Engine on Windows is using a configuration file. The configuration file can be found at ‘c:\ProgramData\docker\config\daemon.json’. If this file does not already exist, it can be created.
This sample configures the Docker Engine to accept incoming connections on port 2375. All other configuration options will use default values.
{ “hosts”: [“tcp://0.0.0.0:2375”] }
this sample configures the Docker daemon to only accept secured connections over port 2376.
{ “hosts”: [“tcp://0.0.0.0:2376”, “npipe://”], “tlsverify”: true, “tlscacert”: “C:\\ProgramData\\docker\\certs.d\\ca.pem”, “tlscert”: “C:\\ProgramData\\docker\\certs.d\\server-cert.pem”, “tlskey”: “C:\\ProgramData\\docker\\certs.d\\server-key.pem”, }
Source: https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon

Question No : 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: You open Active Directory Domains and Trusts, right-click Active Directory Domains and Trust in the console tree, and then click Operations Master.
Does this meet the goal?

• A.Yes
• B.No

答えを確認する

正解:
Explanation:
This solution only shows the Domain Naming Master.

Question No : 11
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)



You need to ensure that VM1 will retain access to the network if a physical network adapter card
fails on Server1.
What should you do?

• A.From the properties of the NIC team on VM1, change the load balancing of the NIC team.
• B.From Hyper-V Manager on Server1, modify the settings of VM1.
• C.From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfigurationcmdlet.
• D.From Hyper-V Manager on Server1, modify the properties of vSwitch1.

答えを確認する

正解:
Explanation:
You can configure NIC teaming in the Guest OS; however, before NIC teaming will work in a virtual machine, you need to enable NIC teaming in the Advanced Features section of the VM settings.

Question No : 12
You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.
You need to configure the Docker daemon to accept connections only on TCP port 64500.
What should you do?

• A.Run the sc control command.
• B.Run the New-NetFirewallRule cmdlet.
• C.Modify the routing table on Server1.
• D.Run the sc config command.

答えを確認する

正解:
Explanation:
References: https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-
docker-daemon

Question No : 13
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: From Windows PowerShell, you run Get-ADDomainController -Discover -Service 2.
Does this meet the goal?

• A.Yes
• B.No

答えを確認する

正解:
Explanation:
References: https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo­roles/

Question No : 14
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: From a command prompt, you run netdom query fsmo.
Does this meet the goal?

• A.Yes
• B.No

答えを確認する

正解:
Explanation:
References: https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has­your-fsmo-roles/

Question No : 15
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master.
Does this meet the goal?

• A.Yes
• B.No

答えを確認する

正解:
Explanation:
This solution only shows the domain FSMO roles, not the forest FSMO roles.
References: https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has­your-fsmo-roles/