SCP-NPM 実際試験問題と解答 - 模擬練習 - 受験自信を増やす

Question No : 1
What is required of your nodes to detect duplex mismatches? (Choose all that apply.)

A.Duplex of both devices must be identified as full or half
B.Ensure corresponding values for each interface are different
C.The nodes must support topology and be interconnected
D.Unify the duplex mode configuration on neighboring interfaces

正解:

Question No : 2
You start a new job where NPM is already in use. As soon as you are added to the alert list, you begin receiving “high traffic utilization” alerts from a handful of interfaces.
When you check the alert, the traffic spike has ended. Your new colleagues advise you to ignore these alerts because the spikes rarely last for more than a couple of minutes and are only a concern if they last longer.
How should NPM be modified so you receive fewer false alerts?

A.Configure the alert so that it triggers only when traffic utilization remains high for a sustained period
B.Configure the alert so that it resets only when traffic utilization remains high fora sustained period
C.Increase the status polling frequency on the problematic interfaces
D.Increase the statistics polling frequency on the problematic interfaces

正解:

Question No : 3
How many agents does NPM require for Quality of Experience, NetPath, and system monitoring on the same Windows server?

A.3
B.1
C.5
D.2

正解:

Question No : 4
Your network includes the headquarters and three remote sites. Users from remote site A complain they do not have access to the company’s accounting server. Users from remote site B and C have access to the accounting server.
How can you find the source of the issue?

A.Use NetPath to see if there are problem areas between remote site A and the headquarters
B.Verify that the accounting servers’ CPU utilization are not abnormally high
C.Use NetPath to see if there are problem areas between remote site A and remote sites B and C
D.Verify that the accounting servers are up

正解:

Question No : 5
Which items can you display in Web Console maps?

A.Monitored nodes and network links
B.Quarks, gluons, Leptons, nodes, and network links
C.Interfaces, volumes, and database instances
D.Monitored nodes, interfaces and volumes, SAM applications and components, and network links

正解:

Question No : 6
Half of your objects in a nested map are down, but the top level map is up.
What is the cause?

A.You set availability thresholds for devices to above 50%
B.You set availability thresholds for devices to below 50%
C.You set map status thresholds to above 50%
D.You set map status thresholds to below 50%

正解:

Question No : 7
How can you quickly generate a report in NPM to show the top 50 interfaces by percent utilization?

A.Create a web-based report and filter the data to restrict to the top 50 interfaces
B.Copy a similar default report and edit it for different time-frames
C.Copy a similar default report and edit it for the top 50 interfaces
D.Create an advanced SQL query report

正解:

Question No : 8
In which scenario is an agent the best solution?

A.If you cannot allow ICMP polling on your routers
B.If hosts in distributed networks have overlapping IP addresses
C.If the WMI ports are already in use on Linux
D.If Native GLX log file monitoring is required

正解:

Question No : 9
You need to add a new subnet of 500 devices for monitoring.
What is the first step to incorporate these devices into NPM?

A.Collect NetFlow from a core router
B.Perform a Network Discovery
C.Measure network-wide bandwidth consumption
D.Add the nodes using the Add Node feature in Manage Nodes

正解:

Question No : 10
You have two groups of users C one in Sydney and one in Perth.
How do you limit the users within the Orion Platform so they only have access to the devices in their location?

A.Group devices into geographical Orion groups and use single group Account limitations to limit user access
B.Configure Network Atlas to show only devices in their geographical location
C.Use the Orion Service Manager to limit user access to nodes only in their location
D.Configure the Orion Web Console settings to show only devices in the user’s geographical location

正解:

Question No : 11
You can import device-specific MIBs into the SolarWinds MIB Database, but you cannot import UnDP pollers based on OIDs from device-specific MIBs.

A.True
B.False

正解:

Question No : 12
You’re troubleshooting a complex network issue and need to build a comparison of several metrics across multiple devices and SolarWinds products to identify the problem.
What feature can you use?

A.PerfStack
B.Network Insight
C.NetPath
D.AppStack

正解:

Question No : 13
The Universal Device Poller retrieves management data in which format?

A.OID
B.WMI
C.XML
D.ANSI 1

正解:
Explanation:
Reference: https://documentation.solarwinds.com/en/success_center/npm/content/core-creating-universal-device-pollers-sw551.htm

Question No : 14
How can you ensure the trigger actions you set on an alert will work?

A.Use the Database Manager to trigger and test the alert
B.Simulate a performance interruption on a network device to test the alert trigger
C.Click Simulate on the assigned trigger action
D.Test the alert from within Alert View of the Web Console

正解:
Explanation:
Reference: https://documentation.solarwinds.com/en/success_center/orionplatform/content/core-setting-trigger-actions-and-escalation-levels-sw1031.htm#:~:text=In%20an%20existing%20alert%2C%20click,actions%20in%20this%20escalation%20level

Question No : 15
Users report that NPM performance is slow when managing devices through the Orion Web Console. You verify the SNMP trapping is responsible for the poor performance.
How do you resolve this issue?

A.Add the devices as managed nodes to cut down on the trap messages received
B.Point the devices to a trap manager and filter unwanted messages before forwarding remaining traps to the Orion Platform
C.Reduce the number of days SNMP messages are kept in the SolarWinds Trap Viewer
D.Add an Additional Web Server to handle the load of users accessing the NPM Orion Web Console

正解:

SolarWinds SCP-NPM 問題練習