NS0-183 実際試験問題と解答 - 模擬練習 - 受験自信を増やす

Question No : 1
You must replace a FAS2750 switchless cluster with an AFF A220 switchless cluster for a customer. The customer requires that you transfer the data from the FAS2750 cluster to the AFF A220.
In this scenario, which two methods would you use to migrate the customer’s data? (Choose two.)

A.Establish an SVM-DR relationship between the two clusters and activate the destination SV
B.Remove all of the HDD drives from the FAS cluster and install them into the AFF cluster.
C.Install SAS cables between the two clusters and use the vol move command.
D.Provide cluster switches and build a 4-node cluster, then use the vol move command.

正解:

Question No : 2
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)

A.data switch cabling
B.cluster switch cabling
C.shelf connectivity
D.node CPU utilization

正解:
Explanation:
Reference: https://www.doc-developpement-durable.org/file/Projets-informatiques/cours-&-manuels-informatiques/Netapp/Data%20ONTAP%208.0%207-Mode%20System%20Administration%20Guide.pdf

Question No : 3
Click the Exhibit button.

As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)

A.private network
B.cluster LIFs
C.client network
D.management LIFs

正解:

Question No : 4
You are installing a 4-node AFF A400 cluster and are asked to create a custom security message before and after user login.
Which two security features are used to perform this task? (Choose two.)

A.EMS
B.banner
C.motd
D.AutoSupport

正解:

Question No : 5
Click the Exhibit button.

Your ONTAP cluster shows the cluster network errors that are shown in the event log.
What is used by ONTAP software to log the errors that are shown in the exhibit?

A.SNMP
B.AutoSupport
C.BGP
D.EMS

正解:

Question No : 6
In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)

A.intercluster SnapMirror
B.intracluster SnapMirror
C.Epsilon voting
D.cluster database replication
E.remote cluster peering

正解:

Question No : 7
You are installing a new AFF A400 cluster and need to access the cluster management LIF from a remote subnet with the fully qualified domain name (FQDN) a400.lab.netapp.com.
In this scenario, which two network components must be configured to log in to ONTAP System Manager from the remote subnet? (Choose two.)

A.route
B.NTP
C.DNS
D.VLAN

正解:

Question No : 8
What should you do to change the data protocol of a LIF?

A.Delete and re-recreate the LI
B.Add the new data protocol to the LI
C.Put the LIF in another broadcast domain.
D.Shut down the assigned port.

正解:
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID-26EEBB35-4CA6-4814-B819-32DAB46F50E5.html

Question No : 9
Click the Exhibit button.

A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)

A.Relocate the switches or the AFF A400 so that the distance is less than five meters.
B.Install 10 meter NetApp supported copper cables.
C.Change the requirement for Ethernet cables.
D.Change the requirement for optical cables.

正解:

Question No : 10
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?

A.Active IQ scheduled reports
B.NetAppDocs output report
C.ONTAP System Manager
D.Active IQ Config Advisor worksheet

正解:

Question No : 11
Click the Exhibit button.

You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?

A.Swap node1:e8a and node2:e4a.
B.Swap node1:e4a and node1:e8a.
C.Swap node2:e4a and node2:e8a.
D.Swap node1:e4a and node2:e4b.

正解:

Question No : 12
While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.
In this scenario, which two statements are true? (Choose two.)

A.You must move the boot device from the impaired node to the replacement node.
B.The boot device must remain intact and must not be removed from the impaired node.
C.You can change any drives or disk shelves as part of this replacement procedure.
D.A controller model of the same type must be used to replace the impaired node.

正解:
Explanation:
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1147156 (2)

Question No : 13
When you install a new ONTAP 9.7 4-node cluster, which network type is required?

A.data network
B.peering network
C.cluster interconnect
D.intercluster network

正解:
Explanation:
Reference: https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-nmg/Network%20and%20LIF% 20management.pdf

Question No : 14
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?

A.A capacity license is required.
B.A subscription license is required.
C.A site license is required.
D.No license is required.

正解:
Explanation:
Reference: https://www.netapp.com/pdf.html?item=/media/7336-tr4743.pdf (27)

Question No : 15
You install a 4-node cluster with an AFF A400 HA pair and a FAS8300 HA pair. After setup, you are asked to review the audit logs on each controller from a Web browser.
In this scenario, which method provides access to the logs from a Web browser?

A.ACP
B.ADP
C.DNS
D.SPI

正解:

Network Appliance NS0-183 問題練習