Juniper JN0-362 問題練習

Question No : 1
The IPv6 Neighbor Discovery Protocol (NDP) performs the same function as which two IPv4 protocols? (Choose two.)

• A.ICMP
• B.ARP
• C.DNS
• D.DHCP

答えを確認する

正解:
Explanation:
Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ipv6-neighbor­discovery.html#:~:text=Neighbor%20discovery%20for%20IPv6%20replaces,Discovery%20protocol%20(NDP)%20messages.

Question No : 2
Which two functions are performed by the OSPF designated router? (Choose two.)

• A.It advertises link-state information to the AS
• B.It designates some routers as inactive when not needed
• C.It forms adjacencies with all the other OSPF routers on the link
• D.It chooses the backup designated router

答えを確認する

正解:
Explanation:
Reference: https://sites.google.com/site/amitsciscozone/home/juniper-junos/junos--ospf-designated-router

Question No : 3
Which action would you use to connect two virtual switches that are configured on the same router?

• A.Create a VRF routing instance
• B.Create a forwarding routing instance
• C.Connect the virtual switches with a cable
• D.Configure an irb interface

答えを確認する

正解:

Question No : 4
You are asked to change the default TTL handling behavior on your Junos device to ensure that the RSVP-signaled LSPs in your MPLS network cannot be mapped.
Which configuration should be performed to accomplish this task?

• A.Configure the no-decrement-ttlparameter for each LSP on the ingress device
• B.Configure the no-propagate-ttlparameter for each LSP on the egress device
• C.Configure the no-propagate-ttlparameter for each LSP on the ingress device
• D.Configure the no-decrement-ttlparameter for each LSP on the egress device

答えを確認する

正解:

Question No : 5
Click the Exhibit button.



Both configuration hierarchies shown in the exhibit have been committed to your MX Series device.
Which two statements are true in this scenario? (Choose two.)

• A.Traffic destined to 10.3.0.1 will use the R1-to-R6LSP as a next hop
• B.Traffic destined to 10.3.0.1 will not use the R1-to-R6LSP as a next hop
• C.The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 5
• D.The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 7

答えを確認する

正解:

Question No : 6
Click the Exhibit button.



Referring to the exhibit, which two statements are correct? (Choose two.)

• A.The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
• B.The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present
• C.The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
• D.The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present

答えを確認する

正解:

Question No : 7
In a stateless IPv6 auto-configuration scenario, what is the host’s IPv6 address if the interface’s MAC address is 12:34:ab:cd:ef:56?

• A.fe80::1234:abff:fecd:ef56/64
• B.fe8::1234:abff:fecd:ef56/64
• C.fec0::1234:abff:fecd:ef56/64
• D.fe80::1234:abcd:ef56/64

答えを確認する

正解:

Question No : 8
Click the Exhibit button.



You have configured IPv6 over IPv4 tunneling, as shown in the exhibit. However, hosts connected to network 2001:0:0:1::0/64 cannot communicate with hosts on network 2001:0:0:2::0/64. The router R2 has a similar configuration as the R1 router.
How would you solve this problem?

• A.Configure an IGP across the tunnel interfaces
• B.Configure an IPv6 address on the tunnel interfaces
• C.Configure the next hop of the inet6.0 static route to point to the physical interface between the routers
• D.Configure the next hop of the inet6.0 static route to point to the IPv4 address of the remote router

答えを確認する

正解:

Question No : 9
Click the Exhibit button.



Referring to the exhibit, which statement is correct?

• A.Interface ge-3/0/0.0 has a default metric of 10
• B.Interface xe-0/0/0.0 can only form a single adjacency
• C.Interface xe-0/0/0.0 has a default metric of 10
• D.Interface ge-1/0/0.0 can only form a single adjacency

答えを確認する

正解:

Question No : 10
Which three attributes are well-known mandatory BGP attributes? (Choose three.)

• A.next-hop
• B.AS path
• C.local preference
• D.MED
• E.origin

答えを確認する

正解:
Explanation:
Reference: https://www.kwtrain.com/blog/bgp-pt2

Question No : 11
What is the Junos default router priority advertisement value for IS-IS?

• A.64
• B.32
• C.0
• D.127

答えを確認する

正解:
Explanation:
Reference: https://www.juniper.net/documentation/en_US/junos/topics/concept/routing-protocol-is-issecurity-designated-router-understanding.html#:~:text=If%20routers%20in%20the%20network,a%20priority%20value%20of%2064.

Question No : 12
Which two statements are correct about the BGP MED attribute? (Choose two.)

• A.BGP uses the MED value when peering to two or more connections to the same upstream AS
• B.BGP routes require the MED attribute be defined
• C.BGP uses the MED value when peering to two different upstream ASs
• D.BGP assumes the MED value to be 0, if not already defined

答えを確認する

正解:
Explanation:
Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html

Question No : 13
What happens when a packet matches a static route with the next hop parameter set to reject?

• A.The system silently drops the packet
• B.An ICMP message is sent to the source and the packet is forwarded
• C.An ICMP message is sent to the source and the packet is dropped
• D.The packet is forwarded and the packet is marked as rejected in the header

答えを確認する

正解:
Explanation:
Reference: https://www.informit.com/articles/article.aspx?p=30666&seqNum=5

Question No : 14
Click the Exhibit button.



Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and Server-1. When User-1 communicates with Server-2 with packets that are 1472 bytes in size, no packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size with no packet fragmentation. However, if the packet size is larger than 1448 bytes, packet fragmentation occurs.
Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?

• A.The GRE header adds 20 bytes to the packet
• B.The GRE header adds 24 bytes to the packet
• C.The IP header adds 20 bytes to the packet
• D.The IP header adds 24 bytes to the packet

答えを確認する

正解:

Question No : 15
Which two statements are true for GRE tunneling? (Choose two.)

• A.GRE tunnel endpoints must have a valid route to the remote endpoint
• B.GRE tunnels support multiple logical units per interface
• C.GRE tunnels are stateful by default
• D.GRE tunnels support only one logical unit per interface

答えを確認する

正解:
Explanation:
Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/filtering-unicast-packets­multicast-tunnel-interfaces.html#id-configuring-unicast-tunnels