HPE0-J79 実際試験問題と解答 - 模擬練習 - 受験自信を増やす

Question No : 1
When describing network RAID levels 5 and 6 of an HPE StoceVirtual solution, which statements are correct? (Select two)

A.Four storage nodes must be designed to run a supported Network RAID 5 configuration.
B.A minimum of six nodes is needed to build a supported Network RAID 6 environment
C.A minimum of three nodes is needed to build a supported Network RAID 5 environment
D.A minimum of seven nodes is needed to build a supported Network RAID 6 environment
E.Five storage nodes must be designed to run a supported Network RAID 6 configuration.

正解:

Question No : 2
You are presenting a solution for an HPE 3PAR StoreServ system using 3.84 TB cMLC SSD drives. Which additional value should you focus on to appeal to the interests of the company’s CFO?

A.savings of the solution when compared to 1.92 TB cMLC SS
B.savings of the solution when compared to a similar configuration using 10 k SAS drives.
C.performance gain when compared to 1.92 TB cMLC SS
D.savings of the solution, which approaches the cost of 15 k SAS drives.

正解:

Question No : 3
When comparing competitor solutions with your HPE 3PAR StoreServ solution design, which features should you compare?

A.technology, strengths threats
B.mesh architecture, ASIC, manageability
C.cost, complexity, openness
D.fixed cache, services cost

正解:

Question No : 4
Which tool should you use to quickly determine HPE 3PAR Storeserv hearth and performance''

A.Command View 3PAR
B.SSMC
C.3PARCLI
D.CMC

正解:

Question No : 5
HOTSPOT
Your customer needs highest performance and moderate availability in their StoreVirtual solution.
Click on the Network RAID you should recommend.

正解:

Explanation:

C:\Users\certs\Desktop\Untitled.jpg

Question No : 6
At which level is an HPE 3PAR StoreSeiv Reduplication performed?

A.ORAID
B.CPG
C.VV
D.RCG

正解:

Question No : 7
Which information should be collected and analyzed when discovering customer expectations for replication performance?

A.rate of data change
B.bandwidth
C.type of data
D.latency
E.frequency of copies

正解:

Question No : 8
You are planning an HPE StoreVirtual architecture based on a customer’s physical site configuration. The customer has two physical sites and wants to span the cluster between them and requires that all sites should be peers. What should be done to meet this customer’s requirements?

A.Configure a Failover Manager in each physical site.
B.Configure the cluster to span both sites, and configure one site as primary site.
C.Create an additional logical site at each physical site with a Failover Manager.
D.Create a logical third site to provide a Failover Manager.

正解:

Question No : 9
Which resource can be used to verity storage system support when using HPE FlexFaDnc 5900CP switches in a solution design'?

A.HPE QuicKSpecs
B.HPE SAN Design Guide
C.HPE Backup. Recovery, and Archive (BURA) Solutions design guide
D.HPE Single Point of Connectivity Knowledge

正解:

Question No : 10
You are talking to a prospective customer at a medium-to-large enterprise firm about an upcoming storage refresh project they have tor their legacy architecture storage platforms. The customer mentions mat as they grew the size and types of workloads on their present storage arrays. They became slower in terms of IOPS and Ihroughpul. In a few cases, they had to purchase additional arrays to oft load some of the workload They noticed the same impact to performance when they enabled array-based replication
Which HPE 3PAR StoreSeiv architecture feature would solve these issues?

A.The HPE StoreServ storage array uses a high-speed, full-mesh active interconnect to join multiple controller nodes together to form a cache-coherent cluster across the entire array
B.The HPE 3PAR StoreServ storage array is an ideal nigh availability platform that runs its OS in a single instance)
C.The HPE 3PAR ASIC offloads 10 workload performed by microprocessors in legacy storage array platforms
D.The shared links between the controller node and each ot the other nodes operates at 4 GB's full duplex to adequately support the clustering of controller nodes and movement of data between nodes.

正解:

Question No : 11
You are designing a Fibre Channel storage solution for a customer who is currently attaching all hosts through the Ethernet and the TCP/IP protocol. What is an advantage of choosing Fibre Channel over TCP/IP?

A.Less costly networking hardware
B.Support for greater distances
C.Less overhead
D.More robust error correction

正解:

Question No : 12
You are proposing an HPE 3PAR SloreServ solution to a customer who contacted you because of complaints received about the scalability of the company's current solution. The customer has concerns about implementing a new platform from a different vendor and the costs for professional services
What should you mention to the customer to address this concern?

A.Thin Persistence
B.Thin Provisioning
C.hardware-assisted data migration
D.support for SATA drives

正解:

Question No : 13
You are designing an HPE 3PAR StoreServ environment using HPE Smart SAN Which solution components are supported? (Select two.)

A.EmulexHBAs
B.HPE 5900 CP switches
C.Qlogic Fibre Channel HBAs
D.HPE H-series SAN switches
E.Physical 3PAR Service Processor

正解:

Question No : 14
What happens during the fabric login (FLOGI) during the Fibre Channel registration process? (Select two.)

A.Service parameters are exchanged
B.Butfer-to-bufler credits are initiated
C.E_Port FCJDs are assigned
D.F_Port error counters are cleared.
E.Connections between N-Ports are established

正解:

Question No : 15
You are planning an HPE StoreVirtual architecture based on a customer’s physical site configuration. The customer has three physical sites and wants to span the cluster between two of them. All sites should be peers.
What should be done to meet the requirements?

A.Configure a Failover Manager in the third physical site.
B.Configure the cluster to span both sites, and configure one site as they primary site.
C.Create a logical third site to provide a Failover Manager.
D.Configure a Failover Manager in each physical site.

正解:

HP HPE0-J79 問題練習