FCP_FWF_AD-7.4 実際試験問題と解答 - 模擬練習 - 受験自信を増やす

Question No : 1
Which statement is correct about security profiles on FortiAP devices?

A.FortiGate performs inspection the wireless traffic
B.Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
C.Disable DTLS on FortiAP
D.Only bridge mode SSIDs can apply the security profiles

正解:

Question No : 2
When configuring VLANs on SSIDs, what is the primary benefit?

A.Enhanced wireless signal strength
B.Logical segregation of network traffic
C.Simplified guest management
D.Improved load balancing

正解:

Question No : 3
What can result if two APs have overlapping frequencies?

A.Enhanced signal strength
B.RF interference
C.Faster client device authentication
D.Extended DHCP lease time

正解:

Question No : 4
In a packet capture, what might a series of "ACK" packets indicate?

A.Successful data transmission and receipt acknowledgment
B.A client device's failed authentication attempt
C.DHCP server's malfunction
D.The presence of rogue APs

正解:

Question No : 5
Which wireless security measures can be configured on FortiGate to protect against unauthorized access? (Select all that apply)

A.WPA3 encryption
B.SSID hiding
C.Rogue AP scanning
D.Load balancing

正解:

Question No : 6
When securing a wireless environment, which measures can help prevent unauthorized access?

A.MAC address filtering
B.Enabling a guest network
C.Using strong encryption like WPA3
D.Regularly changing the network name (SSID)

正解:

Question No : 7
Which action would be most appropriate when a rogue AP is detected?

A.Update the firmware of the rogue A
B.Increase the number of active APs in the area.
C.Suppress or quarantine the rogue A
D.Assign a new SSID to the rogue A

正解:

Question No : 8
VLAN load-balancing features mainly aim to:

A.Strengthen wireless signals.
B.Configure advanced bridge modes.
C.Evenly distribute network traffic across VLANs.
D.Set up guest accounts for visitors.

正解:

Question No : 9
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)

A.When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
B.When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
C.When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
D.When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

正解:

Question No : 10
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)

A.81 Tunnel-Private-Group-ID
B.65 Tunnel-Medium-Type
C.83 Tunnel-Preference
D.58 Egress-VLAN-Name
E.64 Tunnel-Type

正解:

Question No : 11
Which measure is the best indication of a wireless client’s connection quality?

A.Client link rates
B.AP association count
C.Client signal strength
D.Channel utilization

正解:

Question No : 12
Refer to the exhibit.

Why is Radio 3 used for the spectrum analysis?

A.The 5 GHz frequency band is available only on Radio 3.
B.Radio 3 is the configured dedicated monitoring radio for this FortiAP model.
C.Only Radio 3 is compatible with the selected band.
D.Radio 1 and Radio 2 are unavailable to run the spectrum analysis.

正解:

Question No : 13
Which configuration is necessary to allow guest users access to a wireless network using the FortiGate guest management feature?

A.Configure VLANs on SSIDs
B.Set up advanced bridge mode options
C.Provision guest accounts
D.Enable SSID hiding

正解:

Question No : 14
Before a tunnel mode SSID can be used on a FortiGate wireless controller, which task must be completed?

A.Assign a Layer 3 address to the wireless network interface
B.Manually assign the network to a FortiAP profile
C.Enable HTTPS on the wireless network interface
D.Configure a wireless network to Internet firewall policy

正解:

Question No : 15
What might be the issue if multiple client devices can view an SSID but cannot connect to it?

A.Signal strength
B.RF interference from external devices
C.AP's capacity or security settings
D.Client devices' software version

正解:

Fortinet FCP_FWF_AD-7.4 問題練習