300-460 実際試験問題と解答 - 模擬練習 - 受験自信を増やす

Question No : 1
Which three options describe the correct methods to install the Cisco Nexus 1000V VEM (VIB) software module on the VMware ESXi hypervisor? (Choose three.)

A.using the “Add Host to vSphere Distributed Switch” dialog on the vSphere Network tab when Update Manager is installed
B.esxcli software vib install Cn/tmp/Cisco_bootbank_cisco-vem Cv173-esx_5.2.1.3.1.4.0-3.2.1.vib
C.executing the Deploy-Nexus 1000V-VSE
D.ps1 script
E.esxcli software vib install Cv/tmp/Cisco_bootbank_cisco-vem Cv173-esx_5.2.1.3.1.4.0-3.2.1.vib
F.using the Host Selection dialog box in Cisco Virtual Switch Update Manager
G.creating a baseline group in VMware Update Manager

正解:
Explanation:
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/5_2_1_s_v_3_1_4/ install/guide/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV314/ b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV314a_chapter_01.html#task_F02BD77701B 345D9B34A9332AA7C179F

Question No : 2
A Cisco UCS Director administrator is creating a VSAN.
Which two types of VSANs are available? (Choose two.)

A.storage cloud
B.storage hybrid
C.SAN cloud
D.SAN

正解:

Question No : 3
Which Cisco Nexus 1000V configuration implements VxLAN segment 5001 as unicast and segment 5002 as multicast?

A.bridge-domain bd-5001 segment id 5001 no segment distribution mac ! Bridge-domain bd-5002 segment id 5002 group 239.1.1.2
B.segment mode multicast bridge-domain bd-5001 segment id 5001 segment mode unicast-only ! Bridge-domain bd-5002 segment id 5002 group 239.1.1.2 segment mode multicast
C.segment mode unicast-only bridge-domain bd-5001 segment id 5001 ! Bridge-domain bd-5002 segment id 5002 group 239.1.1.2 no segment mode unicast-only
D.segment mode unicast-only bridge-domain bd-5001 segment id 5001 ! Bridge-domain bd-5002 segment id 5002

正解:
Explanation:
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/ guide_c07-728863.html

Question No : 4
Which three operations can a cloud administrator perform when using the vSphere Client configuration tab? (Choose three.)

A.View the processor and memory configuration of the ESX host
B.Configure the host as NTP client
C.Configure datastore backups
D.Configure zoning
E.View target initiators and zones
F.Configure the primary/secondary DNS server
G.configure masking

正解:

Question No : 5
In Cisco UCSM, which two options describe the purpose of a service profile template? (Choose two.)

A.With a service profile template, you can quickly create several service profiles with the same basic parameters, such as the number of vNICs and vHBAs, and with identify information drawn from the same pools.
B.A service profile template parameterizes the UIDs that differentiate one instance of an otherwise identical server from another. Templates can be categorized into two types: initial and updating.
C.When using an initial service profile template, changes to the initial template automatically propagate to the bound service profiles.
D.Service profiles created from an updating service profile template do not inherit all the properties of the template and remain connected to the template. Any changes to the template must be propagated manually to the service profiles that are created from the template.

正解:

Question No : 6
Refer to the exhibit.

You have been asked to create a trunking (802.1 q) port group on a VMware vSwitch.
Which number must be assigned as the VLAN ID to trunk al VLANs?

A.4095
B.1
C.1-4095
D.0

正解:

Question No : 7
A Cisco UCS Director administrator is installing a Bare Metal Agent and is in the process of adding an NFS mount point.
Which Administration menu option does the administrator choose to add an NFS mount point?

A.Compute Accounts
B.Storage Accounts
C.Physical Accounts
D.Bare Metal Accounts

正解:

Question No : 8
A Cisco UCS Director administrator is attempting to resolve a workflow validation issue.
Which option lists the steps that accomplish this task?

A.On the menu bar, choose Policies > Catalogs. Click the Activities tab. Choose the workflow that failed validation. Click Validate Workflow. In the Workflow Validation dialog box, double click the description under Resolution. In the Validation Errors dialog box, view the summary for the issue detected and complete the wizard to resolve the validation error.
B.On the menu bar, choose Policies > Orchestration. Click the Activities tab. Choose the workflow that failed validation. Click Validate Workflow. In the Workflow Validation dialog box, double click the description under Resolution. In the Validation Errors dialog box, view the summary for the issue detected and complete the wizard to resolve the validation error.
C.On the menu bar, choose Policies > Orchestration. Click the Workflows tab. Choose the workflow that failed validation. Click Validate Workflow. In the Workflow Validation dialog box, double click the description under Resolution. In the Validation Errors dialog box, view the summary for the issue detected and complete the wizard to resolve the validation error.
D.On the menu bar, choose Policies > Catalogs. Click the Workflows tab. Choose the workflow that failed validation. Click Validate Workflow. In the Workflow Validation dialog box, double click the description under Resolution. In the Validation Errors dialog box, view the summary for the issue detected and complete the wizard to resolve the validation error.

正解:

Question No : 9
An administrator is troubleshooting basic connectivity between two Fibre Channel points that include node hops and latency data.
Which tool is the best for troubleshooting this scenario?

A.ping
B.fctraceroute
C.traceroute
D.fcping

正解:
Explanation:
Ping and traceroute are two of the most useful tools for troubleshooting TCP/IP networking problems. The ping utility generates a series of echopackets to a destination across a TCP/IP internetwork. When the echo packets arrive at the destination, they are rerouted and sent back to the source. Using ping, you can verify connectivity and latency to a particular destination across an IP routed network. The traceroute utility operates in a similar fashion, but can also determine the specific path that a frame takes to its destination on a hop-by-hop basis.

Question No : 10
You have been asked to configure a virtual fiber channel interface.
Which information is needed to complete this task?

A.Fibre Channel ID and VSAN database key
B.VSAN ID and Fibre Channel interface
C.active zoneset and VSAN ID
D.VLAN ID, VSAN ID, and Ethernet interface number

正解:
Explanation:
Check section “Creating a VFC” of the link; http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ ucs-director/network-devices-mgmt-guide/b_Network_Devices_Management_Guide/ b_Network_Devices_Management_Guide_chapter_01001.html

Question No : 11
Which two fields are needed for a Cisco UCS Director administrator to configure a WWN block? (Choose two.)

A.the first WWNN or WWPN address in the block
B.the WWN for the initiator
C.a unique name for the initiator
D.a unique name for the block
E.the number of WWN or WWPN addresses in the block

正解:
Explanation:

Question No : 12
Which three options does the Cisco UCS Manager boot policy determine? (Choose three.)

A.initiator port range
B.selection of the boot device
C.location from which the server boots
D.initiator and target ports
E.global boot device priority
F.order in which boot devices are invoked

正解:

Question No : 13
Which two statements about management IP pools in Cisco UCS Manager are true? (Choose two.)

A.The number of IP addresses in the pool is not required when creating management IP pools.
B.The management IP pool can be created under Physical > Storage in Cisco UCS Director
C.The management IP pool must contain any IP addresses that have been assigned as static IP addresses for a server or service profile.
D.All IP addresses in the in the out of band management IP pool must be in the same subnet as the IP address of the fabric interconnect.
E.IP addresses in the management IP pool are reserved for external access that terminates in the Cisco Integrated Management Controller on a server.

正解:

Question No : 14
Which option describes the difference between in-band and out-of-band IP management pool in Cisco UCS?

A.An out-of-band network is the only method to connect with the Cisco IMC blade.
B.An in-band network policy requires twice the IP address space of an out-of-band policy.
C.An out-of-band network is reachable over the Fabric Interconnect server interfaces, and in-band network is reachable over uplink interfaces.
D.An out-of-band network is reachable over the Fabric Interconnect mgmt0 interfaces, and in-band network is reachable over uplink interfaces.

正解:

Question No : 15
With which three types of zoning can a Cisco UCS domain be configured? (Choose three.)

A.cloud-based Fibre Channel zoning
B.Cisco UCS local Fibre Channel zoning
C.hybrid-based Fibre Channel zoning
D.switch-based Fibre Channel zoning
E.no zoning
F.vBlock-based Fibre Channel zoning

正解:
Explanation:
Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/ b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapter_011011.pdf

Cisco 300-460 問題練習